Shingles
Abolute Urethane cleans and pressure washes existing roof surface with PSI pressure washing machine to ensure adhesion. The roof
is then primed with Henry's #104 primer at a rate of 1/2 gallon per square. Polyurethane foam can be applied at varying thicknesses,
but most commonly used is 1"-1.5". Each inch of foam adds an R-value of 7. Any low areas are filled with polyurethane to eliminate ponding.
Appliacation of Henry's permax 120 elastomeric coating at 18 mils thick in two seperate coats; grade base coat then white top coat
for maximum sun reflection. The elastomeric coat is the main source of water proofing, is applied in a cross hatch pattern, and back
rolled to ensure even coverage. All cracks are checked and caulked on coping metal with urethane caulking. This system provides a 10
year leak free warranty. Grannules can be added to extend the life of the roof to 15, 20, and 25 year warranties. Polyurethane will
last you a lifetime, but must be maintined by recoating with elastomeric periodically.
|
 
|
052.jpg)
